I would, however, still wonder if the I/O error(s) indicate that the end of my SSD has come close.
Highly unlikely. Install smartmontools and run smartctl to interrogate the smart data.
I ran it and got the following:
smartctl 7.3 2022-02-28 r5338 [aarch64-linux-6.6.62+rpt-rpi-v8] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: ADATA
Product: XPG EX500
Revision: 9301
Compliance: SPC-4
User Capacity: 120.034.123.776 bytes [120 GB]
Logical block size: 512 bytes
Physical block size: 4096 bytes
LU is fully provisioned
Logical Unit id: 0x3048119551602700
Serial number: 48A195E16027
Device type: disk
Local Time is: Mon Dec 2 14:46:18 2024 CET
SMART support is: Unavailable - device lacks SMART capability.
=== START OF READ SMART DATA SECTION ===
Current Drive Temperature: 0 C
Drive Trip Temperature: 0 C
Error Counter logging not supported
No Self-tests have been logged
It says "device lacks SMART capability." Does it mean that I have to change my ADATA XPG EX500 enclsure to something else that supports SMART, if I want USB 3.0 speed?
Statistics: Posted by _crux_ — Mon Dec 02, 2024 1:54 pm