So I have a CAMJAM Edu kit 3 robot based on a PI0W 1.1, it was running Buster.
I tried adding software and kept getting errors about incorrect # sizes and other problems.
Last night I decided to start again and flashed a new SD card with Bullseye which according to Raspberry Pi Imager I believe is the recomended OS for a PI0W.
It generates a list of available updates but will not apply any of them.
Here is a sample
I have been asking questions on legacy code, probably the wrong forum, and one reply was to try the following in a browser, I cant do it on my
PI0W because the default browser Chromium is not supported, well, that is the error message when I run it.
http://raspbian.raspberrypi.org/raspbia ... _armhf.deb
If I enter this on my PI4 or even iPad, the browser re-directs to
http://mirror.infernocomms.net/raspbian ... _armhf.deb
with a Not Secure message in front and a Domain Blocked title to the tab.
Is this my problem, or is it because I am trying to access from a PI$ and my Ipad.
It is all beyond me, I have tried searching but cannot find any answers, possibly due to how I am asking the question!
Any suggestions would be appreciated, I am trying to get the CAMJAM robot working again o use in my code club.
Steve
I tried adding software and kept getting errors about incorrect # sizes and other problems.
Last night I decided to start again and flashed a new SD card with Bullseye which according to Raspberry Pi Imager I believe is the recomended OS for a PI0W.
It generates a list of available updates but will not apply any of them.
Here is a sample
Code:
sudo apt-get upgrade -yReading package lists... DoneBuilding dependency tree... DoneReading state information... DoneCalculating upgrade... DoneThe following package was automatically installed and is no longer required: libfuse2Use 'sudo apt autoremove' to remove it.The following packages will be upgraded: bluez chromium-browser chromium-browser-l10n chromium-codecs-ffmpeg-extra curl distro-info-data gstreamer1.0-plugins-bad libbluetooth3 libcurl3-gnutls libcurl4 libgstreamer-plugins-bad1.0-0 libssh-gcrypt-4 libzbar0 openssh-client openssh-server openssh-sftp-server ssh tzdata usb.ids xserver-common xserver-xorg-core xwayland22 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.Need to get 8,713 kB/136 MB of archives.After this operation, 1,281 kB of additional disk space will be used.Get:1 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf openssh-sftp-server armhf 1:8.4p1-5+deb11u3 [42.8 kB]Err:1 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf openssh-sftp-server armhf 1:8.4p1-5+deb11u3 File has unexpected size (490 != 42768). Mirror sync in progress? [IP: 198.251.86.230 80] Hashes of expected file: - SHA256:c390e6041f025b70faa2f84e3192142f02c3c30d43cede9a7df7a42e23b7115c - SHA1:33b8d25dfe61115c1285da21e6df30d754ba537d [weak] - MD5Sum:45a52c2ba555f81769e00aca70c3b388 [weak] - Filesize:42768 [weak]I have been asking questions on legacy code, probably the wrong forum, and one reply was to try the following in a browser, I cant do it on my
PI0W because the default browser Chromium is not supported, well, that is the error message when I run it.
http://raspbian.raspberrypi.org/raspbia ... _armhf.deb
If I enter this on my PI4 or even iPad, the browser re-directs to
http://mirror.infernocomms.net/raspbian ... _armhf.deb
with a Not Secure message in front and a Domain Blocked title to the tab.
Is this my problem, or is it because I am trying to access from a PI$ and my Ipad.
It is all beyond me, I have tried searching but cannot find any answers, possibly due to how I am asking the question!
Any suggestions would be appreciated, I am trying to get the CAMJAM robot working again o use in my code club.
Steve
Statistics: Posted by windy54 — Sun Feb 11, 2024 11:09 am