Camera board • Re: IMX290/IMX462 Connecting to rpi5

One eternity later, i got the cable it detects, but it does not work. I think it might just be parameters thingy or?


INFO RPI pisp.cpp:1121 Registered camera /base/axi/pcie@120000/rp1/i2c@80000/imx290@1a to CFE device /dev/media2 and ISP device /dev/media0 using PiSP variant BCM2712_C0Made X/EGL preview window
Mode selection for 960:540:12:P SRGGB10_CSI2P,1280x720/0 - Score: 1125
SRGGB10_CSI2P,1920x1080/0 - Score: 1375 SRGGB12_CSI2P,1280x720/0 - Score: 125
SRGGB12_CSI2P,1920x1080/0 - Score: 375Stream configuration adjusted
[0:00:33.067576794] [1762] INFO Camera camera.cpp:1183 configuring streams: (0) 960x540-YUV420 (1) 1280x720-RGGB16_PISP_COMP1[0:00:33.067747961] [1768] INFO RPI pisp.cpp:1405 Sensor: /base/axi/pcie@120000/rp1/i2c@80000/imx290@1a - Selected sensor format: 1280x720-SRGGB12_1X12 - Selected CFE format: 1280x720-PC1R
[0:00:33.072068739] [1772] WARN IPARPI ipa_base.cpp:1055 Could not set SHARPNESS - no sharpen algorithm[0:00:33.072191757] [1772] WARN IPARPI pisp.cpp:505 Could not set NOISE_REDUCTION_MODE - no Denoise algorithm
[0:00:33.113664683] [1768] ERROR V4L2 v4l2_videodevice.cpp:1906 /dev/video6[18:cap]: Failed to start streaming: Remote I/O errorERROR: * failed to start camera *

Statistics: Posted by OuttaControl — Mon Mar 11, 2024 5:58 pm

---