Troubleshooting • Re: Required bcm2711 datasheet to find mac register address

After io-sock integration with Qnx, MAC address is not getting changed with different h/w. i.e we verified on two different hardware, mac address is always same.(ether 58:9c:fc:00:79:cf).
we are facing the below issue in Rasperry pi 4B 8GB model.
BSP used : BSP_raspberrypi-bcm2711-rpi4_br-710_be-710_SVN946248_JBN18
Can you please suggest?

LOGS:
---------
root@raspi:/root $ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
enc0: flags=0<> metric 0 mtu 1536
groups: enc
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
pflog0: flags=0<> metric 0 mtu 33144
groups: pflog
pfsync0: flags=0<> metric 0 mtu 1500
syncpeer: 0.0.0.0 maxupd: 128 defer: off
groups: pfsync
genet0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=68000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
ether 58:9c:fc:00:79:cf
inet6 fe80::5a9c:fcff:fe00:79cf%genet0 prefixlen 64 scopeid 0x5
inet 192.168.2.75 netmask 0xffffff00 broadcast 192.168.2.255
inet 10.169.231.35 netmask 0xfffffe00 broadcast 10.169.231.255
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

Statistics: Posted by Raspi4bboard — Thu Jun 06, 2024 4:57 am

---