Update…
The separate UART TX and RX JST SH pins (not the TX and RX pins on the 40 pin header) are HIGH when the Pi 5 is running, and drop briefly to LOW when shutting down. Then back to HIGH a couple seconds later after the power off.
The separate UART TX and RX JST SH pins (not the TX and RX pins on the 40 pin header) are HIGH when the Pi 5 is running, and drop briefly to LOW when shutting down. Then back to HIGH a couple seconds later after the power off.
Statistics: Posted by BenStyle — Thu Jun 06, 2024 3:11 am