HATs and other add-ons • Re: Raspberry Pi "official" USB SDXC...
What is the reason of using an extra component? And not just use the RPi SD-card inserted in the microSD card-slot.Statistics: Posted by redvli — Sat Nov 23, 2024 11:37 am
View ArticleTroubleshooting • Re: Trouble Booting Pi 5
If you disconnect everything from the GPIO does it boot?Statistics: Posted by neilgl — Sat Nov 23, 2024 11:50 am
View ArticleGeneral discussion • Re: Largest touch screen with rpi4?
Yoi will have to check if there is a Linux driver (best case they state debian or ubuntu to be supported) for your screen.There have been people here using large 60in (or even bigger) IR overlay...
View ArticleOther projects • Re: Could someone help with my components? (Raspberry Pi...
Hello, a beginner hobbyist here. I, too, am working on making a portable rpi3-powered gaming handheld. All your components look good to me. I just have one question: the tp4056 module that you'll use...
View ArticleTroubleshooting • Re: Pi 5 - two SSDs connected through USB cause hang-ups
Why do you need 2 separate storage devices where 1 is only 1/4 of the capacity of the other?FYI, my 'Samsung SSD 970 EVO Plus 500GB' lists 7.80W when in full operation (nvme-cli tools). If I would...
View ArticleBeginners • Re: Using large touch screen with rpi4
https://www.sharpnecdisplays.eu/p/downl ... nglish.pdf does not state touch What is the output of lsusbStatistics: Posted by aBUGSworstnightmare — Sat Nov 23, 2024 12:09 pm
View ArticleRaspberry Pi OS • Re: Fail! Zero W, rpi imager v.1.8.5., bookworm lite 32
I can confirm that Raspberry Pi Zero 1 and 2 with new Raspberry Pi OS Bookworm Lite (19.11.2024) installed with Imager 1.8.5. work only when HDMI is inserted on Pi. When I remove the cable no SSH!...
View ArticleRaspberry Pi OS • Re: Install Raspberry Pi OS without Raspberry Pi Imager?
I can confirm that Raspberry Pi Zero 1 and 2 with new Raspberry Pi OS Bookworm Lite (19.11.2024) installed with Imager 1.8.5. work only when HDMI is inserted on Pi. When I remove the cable no SSH!...
View ArticleRaspberry Pi OS • Re: Compatibility new Raspberry Pi OS (6.6)
Hello,In many places I see that the new Raspbian bookworm is advertised with Wayland, with significant improvementsRelease date: November 19, 2024System: 32-bitKernel version: 6.6My question is: since...
View ArticleBeginners • Re: What's wrong with few OSes in Raspberry pi?
Look better at the separate distro webpages and you’ll be surprised, e.g., https://wiki.almalinux.org/documentatio ... ry-pi.htmlStatistics: Posted by WouterO — Sun Nov 24, 2024 10:11 am
View ArticleSDK • Re: error: cannot convert 'void (RCOMM::*)()' to 'irq_handler_t'
can emit things like jump tables (when it compiles a switch statement into one) that aren't in the .text segment and hence not affected by the linker script putting that in flash/RAM as requested....
View ArticleTroubleshooting • RS232-RS485-CAN-Board erros
HeyI've got this marvelous pi hatRS232-RS485-CAN-BoardWith this config:Code:...
View ArticleGraphics programming • Re: Shared Memory on Pi5?
many ARM SOC's do not contain this high speed shared memory on the gpu, and that it is mapped onto system ram.Yes, there is only one global shared RAM (LPDDR4X-4267 for Pi5), there is no dedicated...
View ArticleTroubleshooting • Re: Audio and CEC issue/KMS vs FKMS
Adding some additional info, in case its helpful:Code: $ cat /boot/firmware/config.txt # For more options and information see# http://rptl.io/configtxt# Some settings may impact device functionality....
View ArticleRaspberry Pi OS • Re: Autostart with labwc
@thagrol very unfortunate to hear you have been receiving negative responses. Am not sure where I would go otherwise for this content: yours is the only document / tutorial that I have found to...
View ArticleHATs and other add-ons • Re: official raspberry pi power supply not working...
Have you got something back feed power into the board ? e.g. a monitor if so add a discharge resistor to the 5v rail e.g. 1KStatistics: Posted by dp11 — Sun Nov 24, 2024 11:11 am
View ArticleCompute Module • Re: COMPUTE MODULE CM4 NOT BOOTING, LED FAST BLINKING
I won't think power supply issue, because if i am mounting another cm4 on same eval board with same power supply it is workingStatistics: Posted by abhimanyukumarmahto — Sun Nov 24, 2024 11:39 am
View ArticleGeneral discussion • Re: STICKY: PINN - An enhanced version of NOOBS.
I have temporarily removed 3.9.3 for installation, and reverted to 3.9.2 whilst this issue is investigated.Ok. I've created an image file of my PINN RECOVERY and SETTINGS partitions for...
View ArticleNetworking and servers • [SOLVED]Re: Tor Router - Not able to ssh via eth1...
Issue solved afer changing one of rules from Code: iptables -t nat -A PREROUTING -i eth1 -p tcp --syn -j REDIRECT --to-ports 9040toCode: iptables -t nat -A PREROUTING -i eth1 -p tcp ! --dport 22 --syn...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: Raspberry Pi 5 - I2C pull-up ?
Thank-you PhilEStatistics: Posted by Zynalo — Sun Nov 24, 2024 11:58 am
View Article